Filament Profiles

Free slicer profiles for Elegoo and Numakers PLA, PLA+, PLA Matte, PETG and ABS, made for your exact printer. Pick it, download, and print better from the very next layer.

1. Your printer family
2. Your printer
Loading profiles…
Printing with a 0.2, 0.6 or 0.8 mm nozzle?

Tell us your printer, nozzle and filament. We will make the profile for you and send it on WhatsApp.

Why we made these

We know that feeling

A nine hour print that lifts at the corner in hour eight. Strings like a spider web across a model you were proud of. A first layer that will not stick on the one morning someone is waiting for their order. We print every single day at our studio, so we have lived every one of these. That is why we put these profiles together, and why we pick up when you get stuck.

Stringing and blobs

Usually the nozzle is a little too hot, or the spool has soaked up moisture. Each profile starts at the right temperature for that filament, and a few hours in a dryer takes care of the rest.

Corners lifting, prints warping

Bed temperature and cooling decide this one. Every profile sets both for your exact printer, and we kept ABS off open printers so you never fight a battle you cannot win.

First layer will not stick

Wash the plate with warm water and a drop of dish soap, keep fingers off it, and let the profile's first layer settings do their job. It makes a bigger difference than most people expect.

Rough, patchy walls

That is the printer moving faster than the filament can melt. Every profile carries a safe maximum flow for its filament, so speed never quietly costs you quality.

Still stuck? Send us a photo.

Share a picture of the print on WhatsApp with your printer and filament. We look at it ourselves and tell you what to change. No bots, no ticket numbers, just a reply from people who print every day.

Get help on WhatsApp

Bambu Studio (A, P, H and X series)

  1. Tap Download on each profile you want.
  2. In Bambu Studio go to File, Import, Import Configs.
  3. Select the .json files. Pick your printer and they show up in the filament list, each name starting with TA.
  4. Run Flow Dynamics calibration once for each new spool.

ElegooSlicer or OrcaSlicer (Centauri Carbon and Carbon 2)

  1. Tap Download on each profile you want.
  2. In the slicer go to File, Import, Import Configs and select the .json files.
  3. Select your Centauri printer with the 0.4 nozzle and pick the filament.
  4. Run the pressure advance calibration once for each new spool.
FAQ

Common questions

Are these profiles free?
Yes, completely free. We only ask your name and mobile number, so if a print still goes wrong we can help you with it.
Why is there no ABS profile for my A series or P1P?
ABS needs a closed printer to stay warm, otherwise parts warp and crack. On the A series and the P1P we suggest any of the PLA or PETG profiles instead.
Which nozzle are these for?
The standard 0.4 mm nozzle. For a 0.2, 0.6 or 0.8 mm nozzle, tap Request a profile and we will make one for you. On the H2D, H2C and other printers with more than one hotend, the same values apply to every hotend.
The profile does not show up after import. What now?
Update your slicer to the latest version and select the matching printer with the 0.4 mm nozzle. If it still does not show, message us on WhatsApp and we will sort it out with you.